Concentrations of anthropogenic Pt and Pd in urban roadside soils in Xuzhou, China

The potential accumulation of platinum group elements (PGE) in the environment from automobile catalysts is high in urban areas, with the major sinks being roadside soils. Therefore, this investigation presented the detailed study on characterized concentrations of Pt and Pd and their enrichment ratios in urban roadside soils in Xuzhou, China in March 2003. Data from 21 roadside topsoil samples analyzed by inductively coupled plasma-mass spectrometer (ICP-MS) illustrated that the medians of concentrations of Pt and Pd were 2.9 and 2.8 ng/g, respectively. Hierarchical clustering analysis indicated that Pt and Pd were mainly from traffic emissions. Compared to unpolluted soils, computation of Pt and Pd enrichment ratios suggested that the Xuzhou roadside soils had average enrichment factors of 3.53 for Pt (in range of 1.22–5.73) and of 3.37 for Pd (in range of 1.35–4.46). Lower Pt/Pd ratios (in range of 0.35–2.86) in relation to similar studies in other countries were observed, which might be due to the different Pt/Pd ratios in Chinese automobile catalytic converters. Moreover, fine fraction (<250 μm) contained higher concentrations of Pt and Pd compared to the coarse fraction (250–500 μmm).     

Relationship between atmospheric pollution processes and synoptic pressure patterns in northern China

The air pollution index (API) sequences in 10 cities in northern China and the synoptic pressure patterns during autumn and winter from 2002 to 2006 were analyzed with diagnostic and statistical methods. The results showed that the air qualities in northern China had a prominent correlation with the pressure systems. It revealed that (a) the increasing phase of API was associated with high pressure and the successive low pressure, (b) the preceding part of front (i.e. the retral part of low pressure) was associated with the maximum of API values during a cycle of air pollution process, (c) the pressure systems with high gradient led to the decrease of API, and (d) the synoptic pressure patterns and their evolvements were the main causes of regional air pollution processes. These relations can be used to analyze the variation characteristics and mechanism of regional atmosphere pollution process, and provide important basis for the qualitative prediction, control, and management of regional air pollution problems.     

城镇圩区排涝模数计算方法及其与河道调蓄库容关系研究

农业圩区原有的排涝模数计算方法已不适用于城镇圩区.针对城镇圩区的排涝特殊性,通过分析排涝计算的原理,充分考虑圩区内河道的调蓄能力,得到适应城镇圩区排涝计算的方法.以南京市江宁区为例,对城镇圩区的排涝模数进行计算,得到排涝模数与调蓄库容之间的定量关系.     

天氧污泥对问二氯苯的吸附性能

为了研究灭活厌氧污泥和活性厌氧污泥对问二氯苯（m-DCB）的吸附，考察了吸附平衡时间、吸附动力学、吸附等温线、吸附热力学、污泥投加量和pH对吸附m-DCB的影响。结果表明，2种污泥对m-DCB的吸附在1h内达到平衡。应用伪一级、伪二级反应动力学对实验数据进行验证，表明厌氧污泥吸附m-DCB更符合伪二级反应动力学模型。2种污泥对m-DCB的吸附都可以用Langmuir和Freundlich吸附模型拟合，但Langrnuir吸附模型的拟合结果要好于Freundlich模型，且活性厌氧污泥的吸附性能显著高于灭活厌氧污泥。从吸附热力学上看，该吸附为放热反应，低温有利于吸附反应的进行。pH值对2种污泥吸附m-DCB的影响很小。     

纳米技术的风险管理与对策

阐述纳米材料与纳米技术可能导致的环境与健康的不确定风险以及实施安全性评价的必要性.在推动纳米科技和纳米产品研发的同时,应秉持科技进步有益于社会整体发展的原则,针对这些技术可能引起的健康、安全、环境、伦理和社会的隐含问题和不确定性,开展纳米产品及与纳米相关的法律、环境与健康潜在风险研究,制定相关安全性评价和风险管理规范以应对潜在的释放风险.     

La2O3/ZnO/TiO2光催化降解活性艳红K-2BP的研究

采用溶胶-凝胶法制备了La₂O₃/ZnO/TiO₂复合光催化剂,以紫外灯为光源,活性艳红K-2BP为模型降解物,研究了La₂O₃/ZnO/TiO₂的光催化性能。结果表明：当锌和镧的掺杂量w(ZnO)=20%, w(La₂O₃)=0.5%, 煅烧温度为500℃时,La₂O₃/ZnO/TiO₂复合光催化剂的光催化活性最高；当催化剂投加量4 g/L,通气量800 mL/min,初始pH值3.12时,La₂O₃/ZnO/TiO₂对活性艳红K-2BP的降解效果最好。实验证明,La₂O₃/ZnO/TiO₂对活性艳红K-2BP的降解遵从Langmuir-Hinshelwood动力学模型,测得其反应速率常数k＝11.5 mg/(L·min)；吸附常数K＝2.88×10^-2 L/mg。     

泥石流堵塞坝溃决模式实验

为了研究泥石流堵塞坝溃决的模式,采用模型实验对堵塞坝溃决的过程进行模拟,实验历时2个月,共13组.实验中,通过改变主沟的水力参数和坝体参数研究泥石流堵塞坝溃决的全过程,并作了相关记录.通过对理论和实验数据的分析,泥石流堵塞坝的溃决形式有3种:冲刷溃决、有表面流的泥石流堆积体水力再启动、没有表面流的泥石流堆积体重力再启动.讨论了冲刷溃决中颗粒启动和有面流泥石流水力再启动的临界条件,并分析了启动流速u0和颗粒粒径D之间的关系;分析了泥石流重力再启动时堵塞坝坡面破坏的一般形式和特征;通过实验数据对不同溃决形式的溃决条件进行了验证,结果比较吻合.     

电增强载铝活性炭纤维吸附除氟的效果与影响因素

以含氟地下水为研究对象,采用自制电促吸附除氟反应器,开展电增强载铝活性炭纤维吸附除氟的动态实验,研究了不同电压、极板间距、地下水碱度和流速对吸附除氟效果的影响。实验结果表明,在负载炭纤维毡的电极一端加正电,可以提高除氟效果。当电压为1.6 V时除氟效果较好,单位面积炭毡处理达标水量为56.7 L/m2;极板间距设置为4mm时电吸附反应器除氟效果最佳;通过调节pH改变地下水碱度,当地下水pH调节为5.5时,电吸附反应器除氟效果较未调节前提高50%;当采用3对电极板,流速为1.88 m/h时,达到最高表面处理负荷2 073.6 L/(m2.d);探究了反应器的反洗再生方式,并连续进行了吸附再生的动态实验;穿透的反应器以Al2(SO4)3溶液为再生液并采用反向加电1.6 V的方式,可以达到较好的再生效果,实现连续动态运行。     

自制固相微萃取涂层用于自来水中五氯酚的测定

采用石英毛细管作为模具,甲基丙烯酸和乙二醇二甲基丙烯酸酯在石英纤维表面原位聚合得到聚(甲基丙烯酸-乙二醇二甲基丙烯酸酯)作为固相微萃取涂层,并以五氯酚为研究对象,采用顶空SPME-GC-ECD法对该涂层的萃取性能进行评价。使用正交试验优化萃取温度、萃取时间、盐浓度、pH和搅拌速度。在最优条件下,建立了水样中五氯酚的分析方法,方法检出限为1ng/L,线性范围为2～5000ng/L,线性相关系数为0.9999,相对标准偏差(RSD,n=5)为8.9%,加标回收率为110.8%。